DIY spiral staircase – Currently on the market there are many models of the spiral staircase in the kit, easy to install yourself or with the help of a friend or relative. Measure the distance between the floor and the attic. Built the disks, mark in the attic the central axis of the ladder. Removed the base and drilled holes in the ground. Remove the dust that has occurred then insert screw anchors, hitting a hammer nylon.
The screw at the base of the first metal rod of a DIY spiral staircase put the trim and then insert the first separator. Following the same procedure, mounted the stairs. Have marked the cut line, cut the plateau with the saw jig and a sheet timber. Go over the cutting area with sandpaper. Now, firmly hold the ladder to the attic with metal brackets in the kit itself. The measure, mark and cut the piece with the jigsaw and a blade to cut metal.
The next step is to draw the position of the base of the last post on the floor and drill the hole fastening. Remove the dust produced, put the metal part and screw it. Check it is level and definitely look. Now for the handrail. Fold the pieces, giving them the shape that needs to adapt them to the shape of the ladder and present them on the posts. Then screw them. To avoid accidents of a DIY spiral staircase, completely close the attic, raising a balustrade.