Black metal night stand – Bedside tables without legs, Press the top of the black metal night stand leans to lift the underside of the night table on the floor. Have a helper measure the gap from the ground to the bottom of the nightstand. Measure the length of the gap. Note the measurements.
Draw a line matching the length of the section located above the ground with a ruler. Align a ruler to the end of the line and draw a line that matches the height of the distance the black metal night stand sits on the floor. Place a ruler at the top of the line and the angle to the end of the first line you drew. Draw a line to create a pattern for a wooden wedge.
Cut out the template with scissors and trace around it on a piece of wood that matches the depth of the nightstand. Cut along the guides with a jig saw to cut a wedge. Sand the edges with sandpaper grit 220. Turn the nightstand again and apply a drop of wood glue to the low side. Align the wooden wedge with the edge of the nightstand and press the wedge in place. Wood glue oozes clean with a damp cloth. Place a weight on top of the wedge. Let the glue dry wood for two or three hours. Apply stain or cover zero liquid to the exposed edges of the wedge. Turn the black metal night stand to the right.